This expansion joint is made up of a single bellows with its connections. It can absorb movements in any direction, axial, angular and lateral.
It is mainly used to absorb axial dilations in longitudinal direction of straight piping systems, although depending on their design it can absorb small quantities of angular and lateral movements. It is the most straightforward type, although the piping must be controlled (anchored and guided) so the movements foreseen are conveniently directed to the right direction for correct operation.
This design cannot withstand pressure forces and must be supported by duly designed fixed anchorages.
Does not resist the force of the pressure, and must be supported by fixed anchoring that is properly designed. Otherwise, the joint may become overextended, with disastrous consequences.
Supply of expansion joints designed and manufactured for an important pumping station located in Egypt. In this case, due to the movements specified by the client, a type of joint…
As we announced in February, Bikar Expansion Joints was in charge of a project in Bahrain for one of the most important Water and Energy clients in the country, consisting…
Bikar expansion joints makes official the second and last shipment for a desalination plant in Saudi Arabia. In this case it is a project in the extension phase. This project…
Bikar Expansion Joints collaborates with Euskalit in the spread of the European Week of Advanced Management. Our collaborators, called “Astezaleak”, have the mission of promoting these sessions, making visible their…
Sorry, this entry is only available in European Spanish.
As we were already anticipating at the beginning of the year, 2024 is full of news for Bikar Expansion Joints. We are pleased to inform you that we are moving…
There is no better way to start the year than to present important projects completed and on the way to their destination. In this case it is a project in…
Both of them will be in Germany, IFAT 2024 in Munich and ACHEMA 2024 in Frankfurt. On the one hand, IFAT is the world’s leading trade fair for water, sewage,…
This supply consists of rubber expansion joints custom designed and manufactured for one of the most important clients in Asia, in response to special technical requirements. They are large rubber…
Expansion joints designed and manufactured for pumping stations in Egypt. On this occasion, BIKAR has obtained a contract for the design, manufacture and delivery of metallic expansion joints for important…
